Digital Portable Ultrasonic Flaw Detector, Metal Crack
Detection Meter, Weld Testing Equipment
Performance Features
1.Automated calibration of transducer Zero Offset and/or Velocity
2.Automated gain,Peak Hold and Peak Memory
3.Automated display precise flaw location(Depth d,level p,distance s,amplitude,sz dB,ф)
4.Automated switch three staff gauge ((Depth d,level p,distance s)
100 independence setup, any criterion can be input freely, we can work in the scene without test block
5.Big memory of 300 A graph.
6.Gate and DAC alarm；Acoustic-Optical alarm;
7.RS232/USB port,communication with pc is easy；
8.The embeded software can be online updated；
9.Li battery, continue working time up to 10 hours;
10.Display freeze;
11.Automated echo degree;
12.Angles and K-value;
13.Lock and unlock function of system parameters;
14.Electronic clock calendar ;
15.Two gates setting and alarm indication;
16.High-speed capture and very low noise;
17.DAC,AVG ; Solid metal housing;
18.Automated calculate the size of the flaw with w ide bottom type in AVG function.
19.AWS D1.1；
20.6dB DAC functions;
21.Provides high contrast viewing of the waveform from bright, direct sunlight to completae
darkness and easy to read from all angles;
22.Powerful pc software and reports can be export to excel;
Measuring Range and Measuring Error
Range of scanning: 0 mm ~6000 mm
Resolution for scanning: 0.1mm (2.5mm ~100mm) 1mm (100 mm ~6000mm)
Range of gain: 0dB ~110 dB
D-Delay: -20µs～+3400µs
P-Delay: 0µs～99.99µs
Sound speed: 1000 m/s～15000m/s
Operation Environment
Temperature: -10℃~50℃
Humidity: 20%～90%RH
Free of strong magnetic field and corrosion.
Power supply
Li battery 7.4V 4800mAh
Overall dimension: 240mm×150mm×50mm
Weight: 1.6kg
Technical Parameters
| Designation | Technical Data |
| Range of scanning (mm) | Range of scanning (mm):0～6000
Steps: 2.5,5,10,20, 30,40,50,60,70,80,90, 100,150,200, 250, 300, 350, 400, 450,500,600,700,800,900,1000,2000,3000,4000,5000,6000
Adjusting step: 0.1mm(2.5 mm～99.9mm),1mm(100mm～6000mm) |
| D-delay (ms) | D-delay (ms):-20～+3400
Steps: -20,-10,0.0, 10, 20, 50,100,150,200,250,300,350,400,450,500, 600,
700,800,900,1000,1500,2000,2500,3000,3400.
Adjusting steps: 0.1(-20ms～999.9ms),1(1000ms～3400ms) |
| P-delay (ms) | P-delay:0.0～99.99
Adjusting steps: 0.01 |
| MTLVEL(m/s) | MTLVEL:1000～15000
7 fixed levels: 2260,2730,3080,3230,4700,5920,6300,12000
Adjusting steps: 1 |
| Working mode | Single probe (receiving and sending), double probe (one for receiving and another for sending), transmission (transmission probe) |
| Frequency Range (MHz) | 0.5~20 |
| Gain adjustment (dB) | 0～110
Adjusting step: 0.0,0.1,0.5,1,2,6,12 |
| Reject | 0%～80% of screen height, step: 1% |
| Vertical linear error | Vertical linear error is not more than 3% |
| Horizontal linear error | Not more than 0.2% in the scanning range |
| Sensitivity Leavings | ≥62 dB |
| Dynamic range | ≥34dB |
| Alarm | Three modes, i.e. forbidden wave, loss wave and auto |
| A-Scan display area | Full screen or local
A-Scan display freezing and de-freezing A-Scan filling |
| Data save | 300 A-Scan images (including setting of instrument) |
| Standard communication interface with PC | RS232/USB |
| Measuring unit | mm/inch |
| Battery | Li battery 7.4V 4800mAh |
| Power adaptor | Input 100V～240V/50Hz～60Hz
Output 9VDC/1.5A |
| Working temperature | -10℃～50℃ |
| Working humidity | 20%～90% |
| Port type | C9 |
| Overall dimension (mm) | 240×150×50 |
| Weight (kg) | 1.6 |
Standard Configuration
| Designation | Quantity |
| Main unit | 1 |
| 1.5A/9V power adaptor | 1 |
| probe connecting cable | 2 |
| Carrying case | 1 |
| Instruction manual | 1 |
| Straight probe | 10mm 4MHz (One) |
| Angle probe | 8×9 60°4MHz (One) |
Options
| Designation | Quantity |
| Serial cable | 1 (9 pin) |
| Communication software for PC | 1 set |
TAG: Digital Portable Ultrasonic Flaw detector Ultrasonic Flaw Detector
Digital Ultrasonic Flaw Detector
|
|
Digital Portable Ultrasonic Flaw Detector, Metal Crack Detection Meter, Weld Testing Equipment Images
|
